• May 07. 2021

Amorphous wire material is a new type of magnetically sensitive material. The micro-magnetic sensor based on amorphous wire material shows its comprehensive advantages of low cost, small size, low power consumption, and fast response. Compared with the mature and large number of market The magnetoresistive sensor used has the advantages of small hysteresis, fast response, high resolution, high sen...

• May 13. 2021

Guangzhou Amorphous Electronic Technology Co.,ltd use high permeability Amorphous strips for Amorphous cores and current transformer production. Following information about Amorphous alloy: When the alloy is super-rapidly solidified, the atoms cannot be arranged in time to crystallize, then amorphous alloys are obtained. The amorphous alloys with long-range disorder but short-range orderly structu...

• May 31. 2021

The addition of C in the FeSiB alloy system can help to improve the amorphous forming ability, and then design high saturation magnetic flux density amorphous alloy materials, but studies have found that excessive C content will cause the soft magnetic properties of FeSiBC alloys to decrease. The low carbon content FeSiBC material system has a good application prospect in high frequency and high s...

• June 16. 2021

The Fe-based amorphous alloy has a long-range disordered, short-range ordered atomic structure, and has no defects such as dislocations and grain boundaries in the crystal, so it has high strength and hardness. However, restricted by the amorphous formation temperature, preparation process and room temperature brittleness, the current critical dimension of iron-based amorphous alloys is only at th...

• June 24. 2021

A magnetic core is made by ferromagnetic metal or ferrimagnetic compounds, the core with a high magnetic permeability, which popular used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices. The magnetic field created by a current-carrying coil of wire around the core. Comparing no magnetic core, use a magnetic core can increasing the strength of magnetic fie...

• July 14. 2021

"Quality first, product is character"  is the tenet that Guangzhou Amorphous Electronic Technology Co., Ltd. has been adhering to for long-term development. The Amorphous China database shows that the average lifespan of domestic enterprises that produce amorphous alloys and nanocrystalline soft magnetics is about 3-5 years. There are only 30 enterprises in more than 10 years, and less than 5...

• September 14. 2021

Coilcore's AMCC series amorphous c cutting core is made by 1K101 Iron-base amorphous alloy, with material features: Saturation flux density induction: 1.56T Curie temperature(℃): 410 Stacking factor: >0.8 Saturation magnetostriction(*10^-6): <30 Resistivity (μΩ.cm): 110 Ribbon thickness: 25μm Such low core loss & high saturation flux density cut cores popular application in: Power Factor...

• November 30. 2021

Alloys and the Specification Fe-base nanocrystalline alloy ribbon (mainly composed of Fe,Cu,Nb,Si,B)is very low loss with high permeability. It provides excellent performance for current transformer,EMC/EMI,Invent transformer and so on. General Properties and Characteristics Ribbon Dimensions and Lamination Factor Typical Characteristic Fig.1 1k107 Fig.2 1k107B