• March 17. 2021

Guangzhou Amorphous Electronic Technology Co.,ltd use soft magnetic materials high permeability nanocrstalline strips for cores and current transformer production. Following information about nanocrystalline alloy: On the basis of the Fe-Si-B alloy composition, extral added with a trace amount of elements Cu, Nb, and prepared the amorphous ribbon by rapid solidification with a cooling rate of abou...

• May 25. 2021

Coilcore’s Split core current transformers are designed to meet the growing demand of installation into existing networks. Our Split Core (open-able) CTs can be a savings overall in the labor cost savings.Simply clip these around the wires being read. Secure them in place with a zip tie, without disconnecting cables or busbar circuits. Split Core Current Transformer is suitable for ...

• May 31. 2021

The addition of C in the FeSiB alloy system can help to improve the amorphous forming ability, and then design high saturation magnetic flux density amorphous alloy materials, but studies have found that excessive C content will cause the soft magnetic properties of FeSiBC alloys to decrease. The low carbon content FeSiBC material system has a good application prospect in high frequency and high s...

• June 08. 2021

On June 1, 2021, the new standard of power transformers (current transformer core ) was officially implemented. Transformers are basic equipment for power transmission and distribution, which are widely used in industries, agriculture, transportation, and urban communities. About 40% of the power loss of transmission and distribution is the transformer loss , which means it has great potential for...

• June 24. 2021

A magnetic core is made by ferromagnetic metal or ferrimagnetic compounds, the core with a high magnetic permeability, which popular used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices. The magnetic field created by a current-carrying coil of wire around the core. Comparing no magnetic core, use a magnetic core can increasing the strength of magnetic fie...

• July 02. 2021

Common Mode Chokes When we said a common mode choke, it means it was wound both line and neutural windings on a single core. Since the noise would be common mode noise usually, the way to lower (if not eliminate) the unwant noise frequencies is to use a common mode choke As below picture show us details of Common-Mode Signals Defined: Such signals can arise from one or more of the following source...

• July 09. 2021

Coilcore Focus on current transformer manufactures. Here we update the LATEST CTHW1 series Waterproof CT, Split Core Current Transformer which have particularly excellent waterproof performance. Details video: During our test, even under water condition 3 days, it can still work normally. · CTHW1-36 with a 36mm inner hole size, CTHW1-60 with 60mm inner hole size · Meet different diameter...

• July 14. 2021

"Quality first, product is character"  is the tenet that Guangzhou Amorphous Electronic Technology Co., Ltd. has been adhering to for long-term development. The Amorphous China database shows that the average lifespan of domestic enterprises that produce amorphous alloys and nanocrystalline soft magnetics is about 3-5 years. There are only 30 enterprises in more than 10 years, and less than 5...