Mini precise Current Transformer Product Details: Item No.: NT403010-200A Core Type: Nanocrystalline Core Size: 40*30*10mm Current:200A/100mA Copper: 0.14mm * 2000turns Loading: 100Ω Core material parameter: Material Parameter Saturated Induction Density Bs = 1.2 T Material Permeability µo >8x104 Gs/Oe crystallization temperature Tx >510℃ Vickers Hardness Hv= 880 kg/mm2 Curie Temperature Tc ...
The core of precision current transformer is made of high magnetic permeability soft magnetic material - nanocrystalline , and is heat-treated for high temperature protection. The primary and secondary coils are made of high-strength polyester enameled wire, the conductive rod at the lead end has sufficient contact area to ensure stable performance and safe and reliable operation. Coilcore c...
The zero-flux current transformer is also called a magnetic balance current transformer. Based on the electromagnetic induction principle, the theoretical error of the zero-flux current transformer is equal to zero, and there is no ratio difference and angle difference. In order to eliminate the influence of the excitation current on the measurement accuracy, the zero-flux current transf...
The current transformer’s wiring accuracy is very important, because in the secondary circuit, weather the current transformer wiring is appropriate is the basis for weather the secondary circuit appropriate. During power installation engineering projects, the key content is electrical debugging work, especially the secondary circuit inspection, which related to the precise measurement, maintenanc...
This material specification defines possible types of housing for AM cores and adequate types of bandage used for each housing type as well as rules for labeling cores. 1. 2pcs plastic case with locks (black or white) Bandaging is done by supplier. All cores in this type of housing must b...
TMR7201-B series current sensor is an open-close current sensor. Use high sensitivity, high signal-to-noise ratio TMR tunnel magnetoresistive chip design. The sensor has a built-in temperature compensation and nonlinear compensation circuit, which can accurately measure DC, AC and pulse currents, and has excellent primary and secondary electrical isolation performance; it has a very wide response ...
The Iron-base nanocrystalline are composed of iron, silicon, boron and small amounts of copper, molybdenum, niobium, etc., of which copper and niobium are essential elements for living nanocrystalline structures. They were first fabricated into amorphous ribbons, which were then appropriately annealed to form a mixture of micro-crystalline and amorphous structures.Such material is not o...
The performance of nanocrystalline core is determined by the permeability of the strip used for the core and the size of the core (OD, ID, H) Derived from OD, ID, height H Cross sectional area of magnetic core:S = 1 / 2 (OD-ID) *H Magnetic circuit length L = π / 2 * (OD + ID) Due to the gap between the strip layers in the process of core winding, the effective cross-sectional area Se=f...
Categories
New Blog
Tel : +86-20-85649266
Fax : +86-20-85649263
Email : derful@coilcore.com
A402 Zhuangyuangang Industry Park, No.186 Qishan Road, Tianhe District, Guangzhou 510663
© Copyright: 2024 Guangzhou Amorphous Electronic Technology Co.,ltd. All Rights Reserved. 粤ICP备2021057165号
IPv6 network supported