• September 28. 2022

Silicon steel sheet is a ferrosilicon soft magnetic alloy with extremely low carbon content, general silicon content is 0.5-4.5%. The addition of silicon increases the resistivity and maximum permeability of iron, and reduces coercivity, core loss (iron loss), and magnetic aging. Silicon Steel mainly used to make cores for various transformers, motors and generators. The performance indicators of ...

• October 11. 2022

Gallium nitride has the advantage of high frequency characteristics. Currently, the gallium nitride fast charging frequency starting at exceeding 100KHz, even as high as 300KHz. As the power devices' switching frequency increases significantly, various parasitic parameters gradually affect the fast charging efficiency under high frequency conditions.How to eliminate the influence of parasitic para...

• November 04. 2022

The charging pile can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected with the AC power grid, and the output end is equipped wi...

• November 17. 2022

The planar transformer is special designed for low profile & low loss but high power application. Compared with traditional toroidal transformer, laminated core transformer, etc., the planar transformer can be through-hole mounted to the board, or can be integrated into PCB directly , thus the low-profile transformer that could handle a range of current values work. A PCB with traces...

• June 04. 2024

PFC inductors are widely used in switching power supplies because they improve power factor, power efficiency, electromagnetic interference, and greatly enhance circuit stability.   The working principle of PFC inductor is that when the current passes through it, the magnetic field generated will reduce the rate of change of the current, thereby reducing high-order harmonics in the circuit, s...

• June 19. 2024

For the transformer and inductors, we always test Q value. While, what's Q value?What factors are it related to? Q value, as know as  quality factor, its basic meaning refers to the ratio of inductance to loss pressented by a transformer (inductor) when operating at a certain frequency of AC voltage, it is an important parameter for measuring the transformers and inductors. The higher Q value...

• June 25. 2024

To achieve good performance, when making the magnetic ring inductors, it's crucial to follow standard process design specifications. In terms of design we should notice: 1. To ensure a stable inductance, we should avoid use 15K high conductivity magnetic cores. 2. For amorphous nanocrystalline cores, request plastic case, thus core damage of external forces could be reduced during core winding. 3....

• July 05. 2024

The planar core's successful development, a planar transformer (inductor) design was realized. Comparing to traditional transformer, the planar transformer (inductor) winding is a planar structure, have priority including: high current density, high efficiency, low leakage inductance, excellent heat conduction, low EMI radiation, small size, The pa...