• March 17. 2021

Guangzhou Amorphous Electronic Technology Co.,ltd use soft magnetic materials high permeability nanocrstalline strips for cores and current transformer production. Following information about nanocrystalline alloy: On the basis of the Fe-Si-B alloy composition, extral added with a trace amount of elements Cu, Nb, and prepared the amorphous ribbon by rapid solidification with a cooling rate of abou...

• June 16. 2021

The Fe-based amorphous alloy has a long-range disordered, short-range ordered atomic structure, and has no defects such as dislocations and grain boundaries in the crystal, so it has high strength and hardness. However, restricted by the amorphous formation temperature, preparation process and room temperature brittleness, the current critical dimension of iron-based amorphous alloys is only at th...

• July 02. 2021

Common Mode Chokes When we said a common mode choke, it means it was wound both line and neutural windings on a single core. Since the noise would be common mode noise usually, the way to lower (if not eliminate) the unwant noise frequencies is to use a common mode choke As below picture show us details of Common-Mode Signals Defined: Such signals can arise from one or more of the following source...

• August 03. 2021

One of Coilcore's main products is medium voltage transformer nanocrystalline cores. Our nanocrystalline cores for current &voltage transformers are recognized for quality, longevity and adaptability for a number of years. Our nanocrystalline cores supply medium voltage transformer up to 36kV for use in MV or HV applications .  Current Transformers Nanocrystalline Cores • Highest System V...

• August 27. 2021

As a expert of soft magnetic core, Coilcore make high frequency nanocrystalline core to replace old ferrite core, which used in inverter, welder machine.  What's more, we can copper winding the cores of transformers based on OEM design. We obtain question from customers about the HF Transformers, and feedback professional suggestion like below: Question: Is it permissible to connect 6 transfo...

• September 02. 2021

As a expert electronic transformer manufacturer, Coilcore support types of transformer, sensor. Here share details of HALL EFFECT SENSOR. Hall effect sensors are non-contact design, by using magnetic fields, to detect variables such as the proximity, speed, or displacement of a mechanical. Hall effect sensor's output signal is a function of magnetic field density around. When no magnet is present ...

• November 30. 2021

Alloys and the Specification Fe-base nanocrystalline alloy ribbon (mainly composed of Fe,Cu,Nb,Si,B)is very low loss with high permeability. It provides excellent performance for current transformer,EMC/EMI,Invent transformer and so on. General Properties and Characteristics Ribbon Dimensions and Lamination Factor Typical Characteristic Fig.1 1k107 Fig.2 1k107B

• February 11. 2022

A Hall Effect sensor is a transducer that converts a changing magnetic field into a change in output voltage. Hall sensors are used to measure magnetic fields, as well as physical quantities that generate and affect magnetic fields, such as in proximity switches, Hall, position measurement, speed measurement and current measurement devices. In its simplest form, the sensor acts as an analog transd...