• June 19. 2024

For the transformer and inductors, we always test Q value. While, what's Q value?What factors are it related to? Q value, as know as  quality factor, its basic meaning refers to the ratio of inductance to loss pressented by a transformer (inductor) when operating at a certain frequency of AC voltage, it is an important parameter for measuring the transformers and inductors. The higher Q value...

• June 25. 2024

To achieve good performance, when making the magnetic ring inductors, it's crucial to follow standard process design specifications. In terms of design we should notice: 1. To ensure a stable inductance, we should avoid use 15K high conductivity magnetic cores. 2. For amorphous nanocrystalline cores, request plastic case, thus core damage of external forces could be reduced during core winding. 3....

• July 05. 2024

The planar core's successful development, a planar transformer (inductor) design was realized. Comparing to traditional transformer, the planar transformer (inductor) winding is a planar structure, have priority including: high current density, high efficiency, low leakage inductance, excellent heat conduction, low EMI radiation, small size, The pa...

• July 25. 2024

As usual, the transformer with a higher Q value, the better its quality and efficiency. Well, what should we do if the transformer's Q value is too low? What are the factors that lead to a low Q value? As we know: Q=XL/R=2 π fL/R, where XL is the inductance, R is the loss, and f is the operating frequency. The greater the loss, the smaller the Q value will be. For example, if there is a short circ...

• November 22. 2024

With the rapidly development of new energy products such as photovoltaics & automobiles, the glue filling process is becoming increasingly common in transformers (inductors). To improving the efficiency of glue filling, manufacturers have equipped automated glue filling production lines, glue filling has gradually become the standard production process for transformers (inductors). Well,today,...