• March 17. 2021

Guangzhou Amorphous Electronic Technology Co.,ltd use soft magnetic materials high permeability nanocrstalline strips for cores and current transformer production. Following information about nanocrystalline alloy: On the basis of the Fe-Si-B alloy composition, extral added with a trace amount of elements Cu, Nb, and prepared the amorphous ribbon by rapid solidification with a cooling rate of abou...

• May 13. 2021

Guangzhou Amorphous Electronic Technology Co.,ltd use high permeability Amorphous strips for Amorphous cores and current transformer production. Following information about Amorphous alloy: When the alloy is super-rapidly solidified, the atoms cannot be arranged in time to crystallize, then amorphous alloys are obtained. The amorphous alloys with long-range disorder but short-range orderly structu...

• May 19. 2021

We, Guangzhou Amorphous Electronic Technology Co.,ltd, focus on power solutions magnetic transformers, which popular for green power, military, telecommunications, medical, industrial, rail. Toroidal transformers are passive electronic components, made by circular ring or donut shaped magnetic core of ferromagnetic materials, and then wire wound acroundly. Comparing traditional laminated transform...

• May 25. 2021

Coilcore’s Split core current transformers are designed to meet the growing demand of installation into existing networks. Our Split Core (open-able) CTs can be a savings overall in the labor cost savings.Simply clip these around the wires being read. Secure them in place with a zip tie, without disconnecting cables or busbar circuits. Split Core Current Transformer is suitable for ...

• May 31. 2021

The addition of C in the FeSiB alloy system can help to improve the amorphous forming ability, and then design high saturation magnetic flux density amorphous alloy materials, but studies have found that excessive C content will cause the soft magnetic properties of FeSiBC alloys to decrease. The low carbon content FeSiBC material system has a good application prospect in high frequency and high s...

• June 08. 2021

On June 1, 2021, the new standard of power transformers (current transformer core ) was officially implemented. Transformers are basic equipment for power transmission and distribution, which are widely used in industries, agriculture, transportation, and urban communities. About 40% of the power loss of transmission and distribution is the transformer loss , which means it has great potential for...

• June 24. 2021

A magnetic core is made by ferromagnetic metal or ferrimagnetic compounds, the core with a high magnetic permeability, which popular used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices. The magnetic field created by a current-carrying coil of wire around the core. Comparing no magnetic core, use a magnetic core can increasing the strength of magnetic fie...

• July 02. 2021

Common Mode Chokes When we said a common mode choke, it means it was wound both line and neutural windings on a single core. Since the noise would be common mode noise usually, the way to lower (if not eliminate) the unwant noise frequencies is to use a common mode choke As below picture show us details of Common-Mode Signals Defined: Such signals can arise from one or more of the following source...