• May 31. 2022

The four-phase common mode choke is a four-terminal device, which founded by a nanocrystalline magnetic toroidal core as a common mode interference suppression device, four sets same size, same turns numbers coils wound symmetrically. When the common mode current flows, the magnetic flux in the magnetic ring superimposes each other, resulting in a considerable inductance, which has a suppressing e...

• June 07. 2022

This material specification defines possible types of housing for AM cores and adequate types of bandage used for each housing type as well as rules for labeling cores.  1. 2pcs plastic case with locks (black or white) Bandaging is done by supplier. All cores in this type of housing must b...

• June 17. 2022

Magnetic Annealing is vital steps for cores. As a soft magnetic cores producer, we sell machine for you to push further cooperation in Nano crystalline Strips, not for main commercial profits. Our suggestion is based on our expert, the machine is not the fashion type with full automatic system, but it will be the most stable type with basic operation system, like VAC type, which can guarantee...

• August 04. 2022

With the development of miniaturization, thinning and high frequency of electronic equipment, Fe-Si and Fe-Si-Al soft magnetic powder cores are more and more popular used in emerging fields such as new energy vehicles, charging piles, photovoltaic inverters, etc. Today, let's discuss about such iron powder core: What’s Iron Powder Core? Iron powder core is a soft magnetic material, which composed ...

• August 10. 2022

The Iron-base nanocrystalline  are composed of iron, silicon, boron and small amounts of copper, molybdenum, niobium, etc., of which copper and niobium are essential elements for living nanocrystalline structures. They were first fabricated into amorphous ribbons, which were then appropriately annealed to form a mixture of micro-crystalline and amorphous structures.Such material is not o...

• August 19. 2022

The performance of nanocrystalline  core is determined by the  permeability of the strip used for the core and the size of the core (OD, ID, H) Derived from OD, ID, height H Cross sectional area of magnetic core：S = 1 / 2 (OD-ID) *H Magnetic circuit length L = π / 2 * (OD + ID) Due to the gap between the strip layers in the process of core winding, the effective cross-sectional area Se=f...

• August 26. 2022

With the successful development of a planar core, a planar transformer design was realized. The planar transformer requires a magnetic core, and the winding is a planar structure, usually chopped into PCB windings to achieve high frequency and low shape. In the market, the Planar transformers power from 5W to 20KW, frequency from 20KHz to 2MHz, efficiency up to 98%. It’s widely application in tele...

• September 02. 2022

These ribbons are intended for applications in core of r.f. pulse transformer, in chokes, magnetic heads, magnetic screens and other electromagnetic devices instead of electrical steels, permalloys and ferrites, as transducers for antitheft devices and heating elements. The manufacturing technology for measuring ribbons is developed by using of melt quenching(“spinning”). These ribbons have the fo...